MP 25.3 PRO 29 (1.14) mm (in.) | Tweeter | 120 W | 4 Ohm

Il tweeter MP 25.3 con cupola in Tetolon e bobina da 25 mm ha una risposta in frequenza molto estesa e lineare. Il condotto “Center Tuning Duct”, al centro del potente circuito magnetico in Neodimio, permette lo scambio d’aria a bassa resistenza tra la cupola e la camera di carico posteriore, accordandone alla perfezione l’acustica. Ne scaturisce una frequenza di risonanza bassa, funzionale all’incrocio con il woofer, a vantaggio del sound stage che rimane ampio in altezza.
Component Tweeter
Size mm (in.) 29 (1.14)
Power Handling - Peak W 120
Power Handling - Peak Note (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance Ohm 4
Voice Coil Ø 25 (1)
Frequency Response Hz 1.4k ÷ 22.5k
Magnet size D x d x h mm (in.) 24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.) 0.07 (0.14)
Magnet Neodymium
Dome Tetolon
Specifiche tecniche
D mm 29
Re Ohm 3,9
Fs Hz 1200
Le mH 0,02
Vas I -
Mms g 0,17
Cms mm/N 0,1
BL T*m 1,6
Qts 0,55
Qes 1,98
Qms 0,57
Spl dB 91
Specifiche elettroacustiche
Specifiche fisiche
MP 25.3 PRO
A 44 mm 1.73 in.
B 41 mm 1.61 in.
C 27 mm 1.06 in.
D 17 mm 0.67 in.
Risposta in frequenza
MP 25.3 PRO
MP 25.3 PRO
Angle support
MP 25.3 PRO
Flush mounting ring
MP 25.3 PRO
MP 25.3 PRO
Tweeter gasket
MP 25.3 PRO

1. Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.
2. “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
3. High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.
4. 25mm ferrofluid-cooled mobile voice coil.
5. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.
6. Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.
7. Wide array of installation accessories, for an easy OEM integration.